top of page

Tech-Crete Processors is a manufacturer of composite insulating panels consisting of STYROFOAM™ brand foam insulation with a factory applied latex modified concrete coating.


CTI Roof Panels: Tech-Crete CTI® roof panels are self ballasted insulating panels designed for use in a protected membrane roof (PMR) assembly. In a PMR assembly the membrane must be protected from the primary causes of membrane failure: UV radiation, freeze-thaw cycling, thermal cycling and physical damage. Tech-Crete CTI® roof panels offer superior insulation and membrane protection in one easy step.

  • 2’ x 4’ (610 mm x 1220 mm) light-weight 4.5 lb/ft2 (22.5 kg/m2) self-ballasted concrete topped insulated panel

  • An insulated panel for Protected Membrane Roof (PMR) assemblies with highly efficient STYROFOAM™ brand foam insulation and a durable concrete topped suface

  • Interlocking tongue and groove assembly, designed to be loose laid

  • Concrete topping is a nominal 3/8” (10 mm) thick latex modified grey concrete with a smooth finish. A 1/8” (3 mm) relief score line is cut at 2’ (610 mm) along the 4’ (1220 mm) length

  • Extends membrane life by protecting against:

    • Temperature extremes, UV degradation and hail damage

    • Mechanical damage

    • Occasional roof maintenance foot traffic

    • Vandalism and environmental elements (birds, weather etc.)

  • Easy to install

  • Visually attractive

  • Easy to clean

  • Reusable

CFI Wall Panels: Tech-Crete CFI® wall panels are pre-finished exterior insulating panels designed for use in perimeter foundations and low-rise wall installation. Consider them also for tank processes requiring temperature control.

  • Highly efficient insulation and durable finish in one application

  • Reduces energy costs

  • Lightweight - 12-14 Kg (26-30 lb) per panel

  • Easily installed with patented specially designed galvanized steel mounting clips (included with each wall panel shipment)

  • Helps to control dew point location

  • Ideal for new or retrofit exterior applications over block or cast-in-place masonry

  • Retrofit can be accomplished without disrupting activities inside the building

  • Can be installed in most weather conditions

  • Can be field coated with any quality masonry coating to match existing colour, or to upgrade building exterior

  • Extends the life cycle of masonry structures by minimizing freeze-thaw cycle exposure

  • Reusable

  • Concrete facing is extremely durable and easily repairable

  • Styrofoam™ brand extruded polystyrene insulation has proven durability and outstanding moisture-resistant qualities in-wall applications, providing excellent moisture resistance and long-term RSI (R) values

Do you have questions about Tech-Crete products?
bottom of page